Description
Conductivity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP-65 case, and selectable 2 or 4- wire cells. Has programmable reference temperature and coefficients. The 4-20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity and one relay for temperature and an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC.
- Bumpless calibration
- CE approved
- RS-485 output
- Programmable relays for conductivity
- Reversible and isolated 4 to 20ma output
- Programmable relay for temperature
- Conductivity/temp.measurement & control
- Simultaneous analysis and display for measurement and controls
- User programmable reference temperature temperature coefficient
- Selectable 2-wire or 4-wire cells for long cable length & wide measurement range
Specifications
Conductivity Range = 0 uS to 5.0 mS
Conductivity Resolution = 0.01 uS to 1.0 mS
Conductivity Accuracy = 0.5% ± 1 LSD
TDS Range = 0 ppm to 150.0 ppt
TDS Resolution = 0.01 ppm to 0.1 ppt
TDS Accuracy = 0.5% ± 1 LSD
Temperature Range = -10.0 to 120°C
Temperature Resolution = 0.1 °C
Temperature Accuracy = ± 0.1 °C
Reference Temperature = 1.5 °C to 25.0 °C
Temperature Coefficient: = 0.0 % to 40.0%
Basic Cell Constant = 0.01,1 and 10.0
Cell Constant Range = ±30% of basic cell constant
Output Relays Numbers = Two programmable high or low relays for conductivity
Control Type = On/off
Relay Output (Resistive Load Only) = 5amps at 115 VAC, 2.5 amps at 230 VAC
Relay Set Point Hysteresis = User programmable
Current Output Isolated = 4 to 20 mA
Range Selectable = zero, & span
Accuracy = ±0.02 mA
Isolated Voltage = 500 VDC
Maximum Load = 500 ohms
ATC = Sensor Thermistor 10kiloohms at 25 °C
Security Protection = 4digit password
Keypad = Audio feedback
Communication = RS-485
Display = Graphic LCD w/backlight
Power source = 115/230 VAC, 50/60 Hz
Dimensions = 1/4 DIN, depth 148 mm
Weight = 950 gm
Documentation and Supports
6308CT.pdf
